CFM Corporation A053041 - Manual (Page 14)

15
1.
2.
3.
4.
5.
6.
7.
For each bolt, thread on a flat washer,
lock washer and M6 hex nut.
Do not yet tighten the nuts.
After 4 nuts are in place, securely
tighten all of the bolts.
Repeat steps for the other side table.
To assemble each table, use one left and one right
table arm.
Line up the bolt hole of the table arms
to the INSIDE set of holes on the side
table as shown.
For each bolt location, insert a M6 bolt.
Once all bolts are mounted, securely tighten.
Align the assembled side table, along with one
side table bracket to the side of the grill
assembly as shown. Insert the pre-mounted
bolts through the mounting bracket and onto
the side of the
grill assembly.
Assembly Step 6 - Attach the Side Tables
Tools Needed:
Left Side Table
Side Table Arms (2 Left, 2 Right)
Right Side Table
Table Mounting
Brackets (2)
LOCATE THESE PARTS:
USE HARDWARE ”E”
A
B
D
C
M6x25mm
Bolt (8)
Phillips head
screwdriver
10mm Wrench
A
M6 Hex
Nut (8)
B
Washer
(8)
D
Lock
Washer (8)
C