CFM Corporation A053041 - Manual (Page 21)

22
Assembly Step 13 - Attaching the L.P. Gas Cylinder
LOCATE THESE PARTS:
L.P. Gas Cylinder
( ) NOT INCLUDED
4. Attach the regulator to the L.P. Gas
Cylinder valve.
Refer to the following page for
important L.P. Gas Cylinder
connection information.
1.
2.
Lift the tank retainer wire up.
Set the L.P. Gas Cylinder onto the left
foot of the grill, resting it in the grooves.
3. Lower the tank retainer wire down
around the L.P. Gas Cylinder. Snap it
snugly around the tank.
In order to use your new grill immediately,
have your L.P. Gas Cylinder filled prior to
assembly.
Tighten