IC Realtime Max Series: 4/8/16 Channel D1 1.5U Standalone DVR - Manual (Page 99)

89
Here is for you to set proper alarm output.
Please highlight icon to select the corresponding alarm output.
After all the setups please click OK button, system goes back to the previous menu. See Figure
5-53.
Figure 5-53
5.5.4 Manual Record
Please refer to chapter 4.3 manual record.
5.5.5 Account
Here is for you to implement account management. See Figure 5-54. Here you can:
z
Add new user
z Modify user
z Add group
z Modify group
z Modify password.
For account management please note:
z
For the user account name and the user group, the string max length is 6-byte. The
backspace in front of or at the back of the string is invalid. There can be backspace in the
middle. The string includes the valid character, letter, number, underline, subtraction sign,
and dot.
z System account adopts two-level management: group and user. No limit to group or user
amount.
z For group or user management, there are two levels: admin and user.
z One user should belong to one group. User right can not exceed group right.
z About reusable function: this function allows multiple users use the same account to login.
z About user account and MAC. When you add a new user, you can input the MAC address of
current user. Only the user of the same MAC address can access the device remotely.(MAC
address is for the device of the same LAN.) If you leave MAC address item in blank when
you add a new user, the user of any MAC address can access the device remotely. You can
set or change MAC address when you add or modify a user. The MAC address function is
also valid for PSS login. Please note current function does not support IPV6.
After all the setups please click save button, system goes back to the previous menu.