Canon A2000 IS - Manual (Page 19)

Setting the Date and Time
19
Changing the Date and Time
You can change the date and time as needed.
Display the menus.
● Press the
· button.
Select [Date/Time] in the 3 tab.
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Date/
Time], then press the
m button.
Change the date and time.
● Follow Steps 2 and 3 on the left page to
change the date and time.
● To close the menus, press the · button.
• Set the correct date and time. If you have not set the date and time, the Date/
Time menu will appear each time you turn on the camera.
• If you removed the batteries from the camera, it is possible that the Date/Time
settings are deleted after approximately 3 weeks. If this occurs, set the date and
time again.
Reappearing Date/Time Menu
This camera is equipped with a built-in rechargeable lithium ion battery to
save the Date/Time settings. You can recharge the battery when inserting
AA-size alkaline batteries or using the separately sold AC adapter, within
approximately 4 hours. You do not need to turn the camera on for
charging the battery.