Great Planes Patriot XL Kit - GPMA0450 - Manual (Page 35)

❏
Assemble the instrument panel as shown.
❏
1. Locate the two halves of the cowl and carefully cut
out the two halves. Cut as close to the bottom of the molding
as possible.
❏
2. Test fit the cowl halves. Trim as necessary to get the
two halves to meet flush.
❏
3. Using masking tape, hold the two halves of the cowl
together as they would be when attached to the fuse.
❏
4. Cut two strips of leftover ABS plastic to make braces for
the inside of the cowl where they are joined. Be sure to leave
enough room for the cowl to slide over the fuse, so the sheeting
does not get in the way. Glue in place using medium CA.
Assemble the Cowl Assemble the Instrument Panel
(Optional)
35