GME TX4600 - Manual (Page 14)

PAGE 14 INSTRUCTION MANUAL TX4600
beeps. The left-hand character of the ALPHA
name will flash. Press the Channel selector
keys to select the required letter in the
flashing character position.
The following characters are available:
A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z _ SPACE - ,
0 1 2 3 4 5 6 7 8 9
TIP: Holding the channel selector key for a few
seconds will cause the radio to step quickly
through the available characters.
(b) Briefly press the F key again to select the
next character position.
(c) Repeat steps (b) and (c) to enter all 5
characters as required.
(d) Now press and hold the F key. The entire
ALPHA name will flash for a few seconds
then the radio will beep as the name is
stored.
Repeat the procedure to add ALPHA names to
any other SelCall Idents stored in memory.
To exit the CALL TO mode
Briefly press the CALL button. The radio will
return to normal operation.
NOTE: The radio can be left in the ALPHA display
mode so that an incoming SelCall matching one
of those in the radio’s memory will display the
name associated with that SelCall Ident instead
of the Ident itself. Any incoming Selcalls not
matching those in the memory will display ‘NEW’.
To display the SelCall Ident of that caller, briefly
press the F key followed by the ALPHA key to
return to the NUMERIC display mode.
RECEIVING SELCALLS
When your TX4600 receives its SelCall Ident,
an alarm will sound to alert you to the call.
Initially the alarm will beep urgently at 2 beeps
per second for around 10 seconds then slow
to around 1 beep every 3 seconds if the call
is not answered. It will then continue to beep
indefinitely until you cancel it (the way your
TX4600 handles the SelCall alert can be altered
by your Dealer).
In addition to the alarm, the words ‘CALL FROM’
will appear on the display along with the callers
SelCall Ident or ALPHA name to inform you of the
identity of the person calling. To switch between
the SelCall Ident and the ALPHA name briefly
press the F key followed by the ALPHA key.
CANCELLING THE SELCALL ALERT
The following are the recommended methods:
To cancel the Alarm and talk on the
Channel
Press the PTT switch and talk in the usual way.
The alarm will be cancelled and the channel will
be open for normal communication.
To return the Call
Press and hold the CALL button for a few seconds
until the radio beeps. The callers SelCall will be
sent to the caller.
CALL TO
CALL FROM
CALL FROM
42333-8_TX4600 IM.indd 14 28/08/13 11:21 AM