GMC 2011 Canyon - Manual (Page 332)

Black plate (80,1) GMC Canyon Owner Manual - 2011
10-80 Vehicle Care
{
WARNING
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle. In
an emergency, use a cloth or a
paper towel to do this; but be sure
to use a scraper or wire brush
later, if needed, to get all the rust
or dirt off. See If a Tire Goes Flat
on page 10‑72.
8. Remove any rust or dirt from the
wheel bolts, mounting surfaces
and spare wheel.
9. Install the spare tire.
{
WARNING
Never use oil or grease on bolts
or nuts because the nuts might
come loose. The vehicle's wheel
could fall off, causing a crash.
10. Put the wheel nuts back on
with the rounded end of the
nuts toward the wheel. Tighten
each wheel nut by hand.
Then use the wheel wrench to
tighten the nuts until the wheel
is held against the hub.