Power door locks, Automatic door locks, Power door locks -5 automatic door locks -5 – GMC 2011 Canyon User Manual
Page 31: Keys, doors and windows 2-5

Black plate (5,1)
GMC Canyon Owner Manual - 2011
Keys, Doors and Windows
2-5
WARNING (Continued)
injuries or even death from
heat stroke. Always lock the
vehicle whenever leaving it.
.
Outsiders can easily enter
through an unlocked door
when you slow down or stop
your vehicle. Locking your
doors can help prevent this
from happening.
To lock or unlock the door from the
outside, use the key in the driver or
front passenger door or press the
LOCK or UNLOCK button on the
Remote Keyless Entry (RKE)
transmitter.
To lock a door from the inside,
move the manual lever on the door
forward. To unlock a door from the
inside, move the lever on the door
rearward.
You will see a colored area on the
lever when the door is unlocked.
Power Door Locks
Driver Switch Shown
On vehicles with power door locks,
the switches are located on the
driver and the front passenger
armrests.
Press L to lock all the doors at once.
To unlock all the doors, press U.
On crew cab models, use the
manual door lock lever on each rear
door to lock or unlock the doors
from the rear seating areas.
Automatic Door Locks
If the vehicle has power door
locks and the remote keyless
entry system, it has an automatic
lock/unlock feature.
If the vehicle has an automatic
transmission, it is programmed
from the factory to lock all doors
automatically when the shift lever is
moved out of P (Park). All the doors
will unlock when the shift lever is
moved back into P (Park).
If the vehicle has a manual
transmission, it is programmed from
the factory to lock all the doors
when the vehicle speed is greater
than 24 km/h (15 mph). The doors
will unlock when the key is removed
from the ignition.
To change the automatic door
lock and unlock settings, see
“Automatic Door Locks” under
Driver Information Center (DIC) on
page 5‑21.