GMC 2011 Canyon - Manual (Page 291)

Black plate (39,1) GMC Canyon Owner Manual - 2011
Vehicle Care 10-39
3. Turn the bulb socket
counterclockwise and remove
it from the lamp assembly.
4. Holding the socket, pull the old
bulb to release it from the bulb
socket.
5. Push the new bulb into the
socket until it clicks.
6. Push the bulb socket straight
into the lamp assembly and turn
it clockwise to secure.
Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps
A. Stoplamp/Taillamp
B. Turn Signal/Taillamp
C. Back‐up Lamp
To replace one of these bulbs:
1. Open the tailgate. See Tailgate
on page 2‑7.
2. Remove the two rear lamp
assembly screws near the
tailgate latch.
3. Pull the lamp assembly away
from the vehicle.