beautypg.com

Service vehicle messages, Tire messages, Transmission messages – GMC 2011 Canyon User Manual

Page 142

background image

Black plate (28,1)

GMC Canyon Owner Manual - 2011

5-28

Instruments and Controls

TRAC (Traction) OFF

This message displays when the
Traction Control System (TCS)
is turned off by pressing the
StabiliTrak button. See StabiliTrak

®

System on page 9‑50 for more
information.

TRACTION FAULT

This message will display if there is
a problem with the TCS. Have your
vehicle serviced by your dealer.
See StabiliTrak

®

System on

page 9‑50 for more information.
Press and release the reset stem
to acknowledge the message and
clear it from the display.

Service Vehicle Messages

SERV (Service) VEH (Vehicle)

This message displays if your
vehicle needs service. Have your
vehicle serviced by your dealer as
soon as possible.

Tire Messages

LOW TIRE

This message displays if a low tire
pressure is detected in any of the
vehicle's tires. Press and release
the reset stem to acknowledge the
message and clear it from the
display. The message appears at
each ignition cycle until the tires
are inflated to the correct inflation
pressure. See Tires on page 10‑50
and Tire Pressure on page 10‑56 for
more information on tires and the
correct inflation pressures.

SERV (Service) TPM
(Tire Pressure Monitor)

This message displays if a part on
the Tire Pressure Monitor System
(TPMS) is not working properly.
The tire pressure light also flashes
and then remains on during the
same ignition cycle. See Tire
Pressure Light on page 5‑19
.

Several conditions may cause this
message to appear. See Tire
Pressure Monitor Operation on
page 10‑60
for more information.
If the warning comes on and stays
on, there may be a problem with the
TPMS. See your dealer.

Transmission Messages

SERV (Service) 4WD
(Four-Wheel Drive)

This message displays when there
is a problem with the transfer case
control system. Check the transfer
case on your vehicle and have
it serviced by your dealer. See
Four-Wheel Drive on page 9‑42 for
more information about the transfer
case. Press and release the reset
stem to acknowledge the message
and clear it from the display.