GMC 2011 Canyon - Manual (Page 105)

Black plate (61,1) GMC Canyon Owner Manual - 2011
Seats and Restraints 3-61
If your child restraint does not have
the LATCH system, you will be
using the safety belt to secure
the child restraint in this position.
Be sure to follow the instructions
that came with the child restraint.
Secure the child in the child restraint
when and as the instructions say.
If you need to install more than
one child restraint in the rear seat,
be sure to read Where to Put the
Restraint on page 3‑48.
1. Put the child restraint on
the seat.
2. Pick up the latch plate, and run
the lap and shoulder portions of
the vehicle's safety belt through
or around the restraint. The child
restraint instructions will show
you how.
3. Push the latch plate into the
buckle until it clicks.
Make sure the release button
is positioned so you would be
able to unbuckle the safety belt
quickly if necessary.
4. Pull the shoulder belt all the way
out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.
5. If your child restraint has a top
tether, attach the top tether
to the top tether anchor. See
Lower Anchors and Tethers for
Children (LATCH System) on
page 3‑50.