GMC 2011 Canyon - Manual (Page 101)

Black plate (57,1) GMC Canyon Owner Manual - 2011
Seats and Restraints 3-57
5. Before placing a child in the
child restraint, make sure it is
securely held in place. To check,
grasp the child restraint at the
LATCH path and attempt to
move it side‐to‐side and
back‐and‐forth. There should
be no more than 2.5 cm (1 in)
of movement, for proper
installation.
Extended Cab — Rear Seat
1. Attach and tighten the lower
attachments to the lower
anchors. If the child restraint
does not have lower
attachments or the desired
seating position does not have
lower anchors, secure the child
restraint with the top tether and
the safety belts. Refer to your
child restraint manufacturer
instructions and the instructions
in this manual.
1.1. Find the lower anchors (D)
for the desired seating
position.
1.2. Put the child restraint on
the seat.
1.3. Attach the lower
attachments on the child
restraint to the lower
anchors (D) in the vehicle.
The child restraint
instructions will show
you how.
2. If the child restraint manufacturer
recommends that the top tether
be attached, attach and tighten
the top tether to the top tether
anchor (C). Refer to the child
restraint instructions and the
following steps:
2.1. Pull on the finger access
tab to remove the cover
to access the top tether
anchors (C).
2.2. Route the top tether (A)
through the loop (B) at
the top of the seatback
to attach the top tether
to the nearest top tether
anchor (C).