GMC 2011 Canyon - Manual (Page 327)

Black plate (75,1) GMC Canyon Owner Manual - 2011
Vehicle Care 10-75
A. Jack
B. Wheel Blocks
C. Wing Nut
D. Jack Knob
2. Lower the jack (A) by turning the
jack knob (D) counterclockwise
to release the jack from the
bracket.
3. Turn the wing nut (C) holding the
wheel blocks (B) to the back of
the vehicle counterclockwise to
release the wheel blocks.
Crew Cab
For crew cab models, the jack and
wheel blocks are located under the
driver side rear seat.
1. Reach under the rear seat to
access the jack and wheel
blocks.
2. Turn the jack knob
counterclockwise to lower the
jack all the way and release it
from the bracket.
3. Remove the wheel blocks and
the wheel block retainer by
turning the wing nut
counterclockwise.