What to prepare, Connections, Basic operotionoi test – Roland RSS-10 User Manual
Page 28: Procedure
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Example Setup 3 Controlling the RSS-10 using the MCR-8
What to prepare
In addition to those prepared for Example Setup 1 or 2,
MCR-8
Supplied Template for the MCR-8
Connections
AUDIO INPUT A
B
RSS-10 1
AUDIO OUTPUT
L
PI
\
MIDI IN
%
MIDI OUT
MCR-8
Basic Operotionoi Test
1. When you have finished all the necessary connections, turn down the volume of the amplifier, then
switch on the units.
2.
Make sure that the indicator of MCR-8 on the panel of the RSS-10 is lit. The MCR-8 should be set
to Mode 4. (See the owner's manual of the MCR-8).
3.
Put the Template for the MCR-8 onto the MCR-8, then press any button. For example, pressing the
Function Mode Selection button on the MCR-8 will automatically change the indicators on the RSS-
10 accordingly.
Procedure
Now, you can control the RSS-10 using the MCR-8. For a detailed explanation, see "HOW TO
OPERATE THE RSS-10 USING THE MCR-8" on page 21.
28