Sehing therss-10, Seningtherss-10, Changing the device id numbers (1 to 64) – Roland RSS-10 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SEHING THERSS-10

The RSS-10 allows you to set the following functions.

♦

In the following description, the buttons on the panel are enclosed with [ ] such as [DEVICE ID].

Changing the Device ID Numbers (1 to 64)

FtMCnON

oirm/T

oa*o

PnOORAM

LOCK

c=o

OPnON

c=>

■ УМ88

оаю

The Device ID Numbers are for distinguishing RSS-1 Os — by applications on a computer, such as

RSS-Stage or RSS-FX. You must set the numbers to match those set for the application. To change

the Device ID numbers, press [DEVICE ID). Pressing the button will increase the number (1 comes
after 64).
The number you set here will remain stored even after the RSS-10 is switched off.

Changing the Function Modes (FLYING. STATIONARY. TRANSAURAL)

DEVICE»

KMO

ПЮОШШ

LOCK

omoN

с=э

BVRUB

c=>

ОСИО

You can see the current Function Mode by means of the Function Mode Indicators. To change the
Function Modes, press [FUNCTION]. Pressing the button will call the modes in sequence.

* For details on the Function Modes, see "FUNCTION MODES" on page 12.

Changing the Output Modes (SPEAKER. HEADPHONES. BINAURAL)

omoH

You can see the current Output Mode in the Output Mode Indicators. To change the Output Modes,
press [OUTPUT]. Pressing the button will call the Output Modes in sequence.

For details on the Output Modes, see "OUTPUT MODES" on page 13.