Futaba 12Z - Manual (Page 69)

69
PUSH
[Cursor Lever]
Ɣ0RYHPHQWRQWKH
VFUHHQGLUHFWLRQV
Ɣ3XVKWKHOHYHUWRFDOO
QH[WSDJH
[Data Input Dial]
[Enter Button]
[Return Key]
Ɣ7RKRPH
VFUHHQ
Ɣ7RSUHFHGLQJ
VFUHHQ
MODEL MENU (COMMON FUNCTIONS)
This section describes the AFR, program mixing,
and other functions common to all model types.
Before setting the model data, use the Model
Type function of the Linkage Menu to select the
model type matched to the fuselage. When another
model type is selected thereafter, the AFR, program
mixing, and other setting data are reset.
The functions in the Model Menu can be set for
each flight condition. When you want to use the
system by switching the settings for each condition
by switch, stick position, etc., use the Condition
Select function to add flight conditions. (Up to 8
conditions can be used)
Note: The T12Z is designed so that the airplane
and glider (including EP glider) model types are
compatible with aircraft of similar type wings.
This section outlines the relationship between the
functions common to airplanes and gliders, except
some dedicated functions, and model type.
The setting items depend on the number of servos
and other differences according to the wing type
used, but reread them. The setup screens in the
instruction manual are typical examples.
(Model Menu screen example)
*The Model Menu screen depends on the model type.
This screen is for model type 4AIL+4FLP.
Model Menu functions (Common) list
Ɣ6(592021,725
Servo test and servo position display (For a
description of its functions, see the Linkage Menu
section.)
Ɣ&21',76(/(&7
Flight conditions addition, deletion, copy,
condition renaming, and condition delay can be set.
Ɣ$)5'5
Sets the rudder angle and curve of all the
operation functions. A D/R curve which can be
switched with a switch, etc. can also be added.
Ɣ352*0,;
Program mixing which can be freely customized.
Up to 10 mixes can be used for each condition.
Ɣ)8(/0,;785(
Mixing used in needle adjustment of engines
which use a fuel mixture control carburetor.
[Airplane, helicopter]
ﶺﶶ﷌﷊ﶼ ﵺ ﶺ﷊ﶸﶪ
ＲＨ０ ﻚ ﻨＬﻜ０ﻦ
．Ｊ０（６ ﻚ ：６８Ｂ，６０
ＲＢ＜ ﻚ ＬＢＨＨＪ０Ｊ：，ﻞ
ＲＢ＜ﻲＮＲ：ＰＪ０Ｈ＜４
Ｎ６８ＬＢ，ﻞ．Ｊ＜ＪＮ，
４０６Ｆﻞ
ﻚ ：Ｂ＄Ｊ．
Ｈ＜Ｒ４ ﻚ ．Ｊ，，Ｂ８Ｆ
ＲＢ０Ｐ０Ｒ＞ＪﻲＪ＜Ｊ
ﴶﴸﴸﳜ
ﶺﶶ﷌﷊ﶼ﷤ ﷎ﶶﶸ﷌ﷂﶬ﷤ ﴶﴸﳰﴶﴸﳰﴸﴸ
ＲＢ＜ﻲ０＊Ｌ
ＲＢ＜ﻲＰ０Ｒ＞ＪＨ＜４
ŏ 6HOHFW WKH PRGHO PHQX LFRQ DW WKH KRPH
screen and call the model menu shown
below by pushing the enter button.
ŏ 8VH WKH FXUVRU OHYHU WR VHOHFW WKH IXQFWLRQ
you want to set and call the setup screen by
pushing the enter button..
ﶺﶶ﷌﷊ﶼ ﵺ ﶺ﷊ﶸﶪ
０＊ＬﻲＪ＜Ｊ
ＮＲ：ＰＪ０Ｈ＜４ﻲＪ＜Ｊ
ＲＢ０Ｐ０Ｒ＞Ｊ
：＊＜，Ｂ ﻚ Ｊ８ＦＢ８Ｊ
．８Ｒ４ ﻚ ０６＜＜
Ｈ＊Ｊ＜ ﻚ ：Ｂ＄，＊０Ｊ
ﴶﴸﴸﳜ
ﶺﶶ﷌﷊ﶼ﷤ ﷎ﶶﶸ﷌ﷂﶬ﷤
ﴶﴸﳰﴶﴸﳰﴸﴸ
（ﻠ，ＲＢ＜
Ｆ＂０６
０＊ＬﻲＲＢ＜