FingerTec i-Kiosk 100 Plus Manual User Manual
Page 96
96
tro
UB
le
Shooting
7
How to define the short message and assign it
to certain users?
Refer to page 63-67 for instructions to define short
messages. The easier way to define the short mes-
sage is by using TCMS V2 software.
8
Do I need to clear the unwanted or outdated
short messages in the reader?
Not necessary, as those messages will be deleted
automatically after the predefined time period has
expired.
9
During enrollment I heard “duplicate finger”.
Why was that?
The “duplicate finger” voice message is to alert
user if the enrolling finger is found to have existed
in the FingerTec® reader. User must use other fin-
ger to enroll.
10
I waved my RFID card to a FingerTec® reader
but it did not respond. What could be the rea-
son?
Please make sure that your RFID card is regis-
tered to the FingerTec® reader, before you use
it. Please also make sure that your user ID is as-
signed into the verification group that supports
RFID card.
11
Do I need to stop the USB pen drive like we
usually do when used in computer before we
could unplug it from the reader?
Not necessary because once download or up-
load operation is completed, it is safe for you to
remove the USB pen drive from the reader.