FingerTec i-Kiosk 100 Plus Manual - Manual (Page 76)

76 CONTENTS
2
1
7
You can change the settings of reader to change its dis-
play screen, alarm outputs and keyboard input.
DiSplay
This option will allow administrator to change the dis-
play settings on screen.
Select Customise followed by Display.
Select (arrow) to go to any field to change settings.
Select to adjust the value of each setting.
There are a total of 11 settings could be configured.
1:1 match retry times: To allow maximum number of tries for
1:1 fingerprint matching, ranging from 1 to 9, default as 3. If a
user failed more than the allowed number, the reader will trig-
ger alarm immediately. Ignore this function if your reader is not
equipped with any alarm system.
password retry times: To allow maximum number of tries dur-
ing password verification. Range from 1 to 9, default as 3. If
user fails more than the allowed trial, reader will trigger alarm
immediately. Ignore if reader is not activate with any alarm
system.
clock mode: To select the display mode of clock on the screen
during idle.
picture delay: To define the delay time for picture to display on
the screen during idle.