FingerTec i-Kiosk 100 Plus Manual - Manual (Page 73)

73
CONTENTS
1
UpDate
This option is to allow installer to update the firmware
version of the reader. The firmware is stored inside the
USB flask disk and the disk has to be plugged into the
reader. The update process will run automatically after
the administrator select the Update button.
Plug the USB flash disk to the reader.
Select System followed by Update to start the update process.
SySteM reSet
This option is to reset all settings in the reader back
to default. All data are kept during the reset proc-
ess. It is not intended to clear storage of the reader
but to reset settings to its default values.
Plug the USB flash disk to the reader.