Power on/off button, R2 or m2 model – FingerTec R2 Manual User Manual
Page 6

1
2
3
4
5
6
7
8
0
9
ESC
OK
MENU
L.E.D Display
LCD Screen
Keypad
Fingerprint
Sensor
USB Port
RFID Card
Induction
Area
Speaker
Reset Button
R2 or M2 MODEL
ITEM FUNCTION
LCD Screen
Displaying status of terminal, day, date and time.
LED Display
Green LED – The terminal is working fine and it is in standby mode.
Red LED – There is an error at the terminal that requires checking. For
first time use, the terminals need to be charged fully to avoid having
the red light blinking.
Keypad
To input instructions into the terminal and to allow configuration.
Fingerprint Sensor
To scan finger for confirmation of identity.
RFID Card Induction Area
Area that reads RFID cards.
USB Port
To upload/download users information, password and transaction
logs via USB flash disk.
Speaker
For terminal voice emission.
Reset Button
To restart the terminal as and when required.
Power On/Off Button
MODEL
HOW TO TURN ON/OFF
AC900
Push on the ‘0’ button
R2 or M2
There is no power button available. Restart using the reset button
shown on the bottom of the terminal.