EVCO EC6190 User Manual
Ec 6-190, Smart guide

Every Contr
ol S.r
.l. • EC 6-190 • Sheet 1/2
1
PREPARATIONS
1.1 How to install the instrument
On DIN rail (it is not supplied by the builder).
DIN rail installation (it is not supplied by the builder).
smart guide
EC
6-190
ON-OFF digital controller for ventilated re-
frigerating units
Version 1.00 of May the fourth, 2002
File ec6190e_v1.00.pdf
PT
EVERY CONTROL S.r.l.
This Company belongs to
Via Mezzaterra 6, 32036 Sedico Belluno ITALY
Phone 0039-0437-852468 • Fax 0039-0437-83648
[email protected] • www.everycontrol.it
1.2 Electrical connection
2
OPERATION
2.1 Preliminary information
During the normal operation the instrument shows the cabinet
temperature.
2.2 How to silence the buzzer
If you have to silence the buzzer:
• press
2.3 How to activate the defrost by hand
If you have to activate the defrost by hand:
• press
for 4 s
Unless the evaporator temperature is below the defrost end tem-
perature you have set with the parameter d2, the defrost will
not be activated.
3
WORKING SETPOINT
3.1 How to set the working setpoint
If you have to modify the working setpoint value:
• press
and
or
(1)
ENGLISH