EVCO EK340AJ7 User Manual
Ek 340a, Smart guide

Every Contr
ol S.r
.l. • EK 340A • Sheet 1/2
1
PREPARATIONS
1.1
How to install the instrument
Panel mounting, panel cut out 67 x 138 mm (2.63 x 5.43 in),
with screw brackets (supplied by the builder).
smart guide
EK
340A
ON-OFF digital controller for electrical pizza
ovens
Version 1.00 of 12
th
May 2004
File ek340a_eng_v1.00.pdf
PT
EVERY CONTROL S.r.l.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY
Phone 0039-0437-852468 • Fax 0039-0437-83648
[email protected] • www.evco.it
installation with screw brackets; moderate the clamping torque, in order not to dam-
age box and screw brackets.
2
OPERATION
2.1
How to turn the instrument ON/OFF
• press
for 2 s
During the normal operation the instrument shows the tempera-
ture the chamber probe is reading (in the display at the top), the
percentage of power supplied to the top heating group (in the
LED bar at the top) and the percentage of power supplied to the
floor heating group (in the LED bar at the bottom).
2.2
How to silence the buzzer
• press
2.3
How to activate/deactivate function Quick heat-
ing
• press
for 2 s
(1)
During this function the instrument supplies the maximum power
both to the top heating group and to the floor heating group.
The temperature the instrument deactivates the function auto-
matically is “ [working setpoint - (temperature you have set with
parameter c3)] “ .
(1)
if parameter c2 has value 0, the function will not be enabled; if parameter c2
has value 2, the function will automatically be activated every time you will turn
the instrument ON; if parameter c2 has value 3, the function will automatically
be activated every time you will turn the instrument ON or pressing
for 2 s
2.4
How to turn the chamber light ON/OFF
• press
3
WORKING SETPOINT
3.1
How to set the working setpoint
• press
• press
or
within 4 s
(2)
• press
(2)
you can set the working setpoint between the limits you have set with param-
eters rA1 and rA2.
4
PERCENTAGE OF POWER SUPPLIED TO THE HEAT-
ING GROUPS
4.1
How to set the percentage of power supplied to
the heating groups
To modify the value of the percentage of power supplied to the
ENGLISH