Cradlepoint MBR1400LE User Manual
Page 85
CRADLEPOINT
MBR1400| USER MANUAL Firmware ver. 3.4.1
© 2012 CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 83
Ethernet Port Configuration
Ethernet
Port
Configuration
provides
controls for your router‘s Ethernet ports.
There are five total ports: one blue port and
four numbered orange ports. While default
settings
will
be
sufficient
in
most
circumstances, you have the ability to
control: Mode (WAN or LAN) and Link
Speed. Additional controls for WAN ports
are available in Internet
→ Ethernet
Settings.
Mode: WAN or LAN. Default setting is WAN
(Wide Area Network) for the blue port and
LAN (Local Area Network) for the four
orange ports.
Internet (WAN) is used to connect to
another network such as a hotel or
office wired network. The WAN
connection is used as a possible source of Internet for the MBR1400.
Local Network (LAN) is for connecting a computer or similar device directly to the router with an Ethernet cable.
Link Speed: Default setting is Auto. The Auto setting is preferred in most cases.
Auto
10Mbps - Half Duplex
10Mbps - Full Duplex
100Mbps - Half Duplex
100Mbps - Full Duplex
1000Mbps - Full Duplex