Cradlepoint MBR1400LE User Manual

Page 81

CRADLEPOINT

MBR1400| USER MANUAL Firmware ver. 3.4.1

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 79

6.7.3

Local Network Interfaces

Each LAN type

—WiFi, Ethernet, and VLAN—has a separate section with configuration options. Unless the default

configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired
interface options for a network. You can then select these interfaces to add to a network in the Local Network Editor
(see above).

Select from the following tabs:



Wireless (WiFi) Network Settings



Ethernet Port Configuration



VLAN Interfaces

Wireless (WiFi) Network Settings

The MBR1400 can broadcast as many as
four SSIDs (service set identifiers

— the

names for WiFi networks). One primary WiFi
network is enabled by default, while you may
have enabled a second guest network when
using the First Time Setup Wizard. You have
the ability to change the settings for either of
these networks and/or enable two additional
networks.

Wireless Radio: Enable/Disable. (Default:
Enabled). Leave enabled unless you don‘t
want any WiFi networks broadcast from your router.

Select a WiFi network and click Edit to change the settings.