Cradlepoint MBR1400LE - Manual (Page 74)

CRADLEPOINT
MBR1400| USER MANUAL Firmware ver. 3.4.1
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 72
6.7 WiFi / Local Networks
This section is used to configure the settings for
wireless networks created by your router. Note that
changes made in this section may also need to be
duplicated on wireless devices that you want to
connect to your wireless network.
For example, if you change a LAN ‘s IP address, devices
within that network will lose connection. They will have to
reconnect to the network.
Firmware 3.3.0 introduced significant changes to
the WiFi / Local Networks page, creating much
more flexibility and control for the user. The
MBR1400 now includes these options:

VLAN (virtual LAN)

As many as four WiFi networks (SSIDs)

NAT-less routing
The user can now set up multiple networks, each
with its own unique configuration and its own
selection of interfaces. Each local network can be
attached to any of the following types of interfaces:

WiFi

Ethernet

VLAN
For example, one network might be just an isolated WiFi hotspot for guests, while another might be the main network with
administrative access, two Ethernet ports, a password-protected WiFi SSID, and a VLAN interface.