Cradlepoint MBR1400LE User Manual

Page 130

Text mode
Original mode

CRADLEPOINT

MBR1400| USER MANUAL Firmware ver. 3.4.1

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 128

7.4.8

VPN with NAT-T

If one side of a planned VPN tunnel is behind a NAT (network address translation) firewall, the setup of your tunnel
requires the following specifications:

1. Each side of the tunnel must use both a Local Identity and a Remote Identity. These must match the identities on

the other side: The Local Identity must match the Remote Identity on the other side of the tunnel, and vice versa. In
this case, these identities can each be a simple word.

2. The Tunnel Name

for the side of the tunnel that is not behind the NAT firewall must be ―anonymous‖.

3. The VPN tunnel must be initiated from the side that is behind the NAT firewall.