Cradlepoint MBR1400LE User Manual

Page 104

CRADLEPOINT

MBR1400| USER MANUAL Firmware ver. 3.4.1

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 102

7.1.5

Modem Settings

On Demand: Typically modem connections are not
always on. When this mode is selected a connection to
the Internet is made as needed. When this mode is not
selected a connection to the Internet is always
maintained.

Maximum Idle Time: The interval for which the
modem can be idle before it is disconnected.

Aggressive Reset: When Aggressive Reset is
enabled the system will attempt to maintain a good
modem connection. If the Internet has been
unreachable for a period of time a reset of the modem
will occur in attempt to re-establish the connection.

LTE Connection Mode: Specify how the LTE Multi
Mode modem should connect to the network.



Auto: Let the modem decide which network to

use.



Auto EVDO/1xRTT: Connect to CDMA, letting the modem decide which 3G network to use. Do not attempt to

connect to LTE.



Force LTE: Connect to LTE only (do not attempt to connect to CDMA/GSM).



Force EVDO: Connect to CDMA EVDO network only.



Force 1xRTT: Connect to CDMA 1xRTT network only.

AT Dial Script: Enter the AT commands to be used in establishing a network connection. Each command must be
entered on a separa

te line. All command responses must include ―OK‖ except the final command response, which must

include ―CONNECT‖.

Example:
AT