Eliminator Lighting Electro Disc LED User Manual

Page 2

Electro IR (Remote Control) On/Off:

This function is used to activate and deactivate the Electro IR (sold separately). When this function is acti-

vated you can control the fixture using the Electro IR. Please see the last page for the controls and functions.

1. Plug the fixture in and press the MODE button until “IrXX” is displayed. “XX” represents either “on” or

“oF”.

3. Press the UP or DOWN buttons to either activate the remote function (On) or deactivate it (Off).

Static Color Mode:

1. Plug the fixture in and press the MODE button until “CL.XX” is displayed.

2. There are 7 colors to choose from. Select your desired color by pressing the UP and DOWN but

tons. After you have selected your desired color you can activate strobing by pressing the SET

UP button to enter the Flash (strobe) mode.

3. “FS.XX” will be displayed, this is Flash mode. The Flash can be adjusted between “FS.0F” (flash

off) to “FS.99” (fastest flash).
Color Change Mode:

1. Plug the fixture in and press the MODE button until “JP.XX” is displayed.

2. Use the UP and DOWN buttons to adjust the color change speed the speed can be adjusted

between “JP.01” (slowest) to “JP.99” (fastest).

3. After you have adjusted and selected your desired color change speed you can activate strobing

by pressing the SET UP button to enter the Flash (strobe) mode. “FS.XX” will be displayed, this is

Flash mode. The Flash can be adjusted between “FS.0F” (flash off) to “FS.99” (fastest flash).
Color Fade Mode:

1. Plug the fixture in and press the MODE button until “FD.XX” is displayed.

2. Use the UP and DOWN buttons to adjust the color fade speed the speed can be adjusted

between “FD.01” (slowest) to “FD.99” (fastest).

3. After you have adjusted and selected your desired color fade speed you can activate strobing by

pressing the SET UP button to enter the Flash (strobe) mode. “FS.XX” will be displayed, this is

Flash mode. The Flash can be adjusted between “FS.0F” (flash off) to “FS.99” (fastest flash).
Auto Run Mode:

1. Plug the fixture in and press the MODE button until “AUTO” is displayed. In Auto Run mode the

unit will run the color change mode and color fade mode alternatively. The speed of each mode is

determined by the setting in each of those respective modes.

2. You can activate strobing by pressing the SET UP button to enter the Flash (strobe) mode.

“FS.XX” will be displayed, this is Flash mode. The Flash can be adjusted between “FS.0F” (flash

off) to “FS.99” (fastest flash).
Sound Active Mode:

In this mode the Electro Disc LED will react to sound, and chase through the different colors.

1. Plug the fixture in and press the MODE button until “SU.XX” is displayed. “XX” represents the

sound senstivity level.

2. Use the UP and DOWN buttons to adjust the sound sensitivity, the sensitivity can be adjusted

between “SU.00” (least sensitive) to “SU.31” (most sensitive).

3. After you have adjusted and set your desired sensitivity you can press the SET UP button to

enter the Flash (strobe) mode. “FS.XX will be displayed when you enter Flash mode. You can

use the UP or DOWN buttons to adjust the strobe rate. The Flash can be adjusted between

“FS.OF” (stobe is off) to “FS.99” (fastest flash).