ebm-papst Kickstart - Manual (Page 10)

10
5 Using Kickstart
5.1 Getting started
WARNING
Do not operate Kickstart within an automation network where any of the Kickstart CAN or CANopen communication could
possibly disrupt the normal operation.
WARNING
Incorrect wiring or wrong cabling can damage electronic components, including the USB-CAN-RS485 adapter, the
CAN-RS485 interface and the PC connected with the CAN Interface.
NOTICe
The USB-CAN-RS485 adapter is required as an accessory for the ebm-papst "Kickstart" software, in order to connect the
PC with the K4 drive. The adapter can be ordered under Material No. 914 0000 400.
• Connect the USB-CAN-RS485-Interface to your equipment first, before connecting it to the PC.
• Switch on power supply for the CAN nodes.
• Connect the CAN Interface to your PC using the USB cable supplied.
• Start the Kickstart software application.
Kickstart presents a home screen that allows you to pick your specific application or project.
Kickstart Main Screen and Project Selector
• Pick a project or an application from the Project Selector list on the right.
• Alternatively, use Open Project to load a Kickstart Project File (.kickzip or .kickpro) that you received for your specific application.