Toshiba IK-TU40A - Manual (Page 7)

© Prism faceplate
® Lens mount
@ Camera cable terminal
® Mounting screws
® None
® Camera cable terminal
® POWER LED
® POWER switch
® FILE switch
® W.B. switch
® GAIN switch
® Manual WB controls
® GAIN adjustment controls
® DISPLAY button
® PAGE button
® MENU UP (SHD) button
® MENU DOWN button
® DATA UP (AWB) button
® DATA DOWN (ABB) button
@ DC IN 12V terminal
@ DC IN/SYNC terminal
S-VIDEO terminal
EXT. SYNC terminal
VIDEO terminal
RGB terminal
HDA/D switch
REMOTE terminal
The protection cap is attached on the lens mount por­
tion. After removing the cap, mount the lens. Be careful
not to scratch or touch the optical area.
C mount lens is mounted.
The camera cable is connected.
Screw holes to fix the camera head mount. (M3 depth of
camera section: 4mm)
The camera cable is connected.
Lights when the power is turned on.
Turns on or off the power supply.
Switch the scene files. (A/B/C)
Switch the white balance mode. (ATW/AWB/MANU)
Switch the gain mode. (AUTO/MANU/NORM)
Adjust R and B gains when the white balance switch ®
is set to MANU.
Adjust video signal gain when the gain switch ® is set to
MANU.
Used when switching the display.
Used when switching to the menu and when selecting
the menus.
Select the function to be confirmed or changed on the
menu. (Also used when performing the shading correc­
tion.)
Select to confirm the function or to change the menu.
Changes the value of the function selected by the MENU
(UP/DOWN) button. (Also used when using AWB.)
Changes the value of the function selected by the MENU
(UP/DOWN) button. (Also used when using ABB.)
Accept a DC power Input (12V).
When DC IN 12V terminal @ is not used, accept DC12V
input. HD and VD signals are input/ou^ut. (The input/
output is switched by the HD/VD switch @.) When 1 pulse
operation is used, the trigger signal is input and the in­
dex signal is output.
Outputs Y (luminance) and C (color) signals.
Used when the camera output signal is synchronized by
the external signal. (BNC connector)
VBS output. Connected to a monitor, VTR, etc. (BNC con­
nector)
Used as the connector terminal for Y/C or VBS output 2,
or A, RGB or Y/P r /P b output, or SYNC output.
Switch input/output of HD, VD signals at DC IN/SYNC
terminal @.
Switch terminal resistor when HD and VD signals are
input.
Used when controlling functions of the camera by RS-
232C.