beautypg.com

Components, Specifications – Toshiba IK-TU40A User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

1. COMPONENTS

(1) Camera head (without lens, protection cap attached)...................................... 1

(2) Camera control unit....................................................................................... 1
(3) Accessories.......................................................................................................1

(a) Instruction manual.................................................................................... 1
(b) Warranty card.......................................................................................... 1

2. SPECIFICATIONS

Power supply

DC12V ±10%

Power consumption

7.4W

Pick-up system

RGB, 3 CCD, Micro prism system

Image sensor

1/3 inch IT-CCD

Effective pixels

Horizontal: 768 pixels. Vertical: 494 pixels

Scanning system

2:1 interlace

Scan frequency

Horizontal: 15.734kHz, Vertical: 59.94Hz

Sync system

Internal/External (automatic switching)

Horizontal resolution

750 TV lines

Sensitivity

F8 (2000 lx, 3000K)

Minimum ilumination

10 lx. (F2.2, Sensitivity +18 dB, 3000K)

SN ratio

62 dB standard

Lens mount

C mount (flange back: 17.526 mm in-air)

Ambient operating

temperature

32 ~ 104°F ( 0 ~ 40°C )

Ambient humidity

Less than 90%

Weight

Camera head: Approx. 2.1 oz (60g),
Camera control unit: Approx. 1.48 lbs (670g)

External dimension
(except for protruded

portions)

Camera head: 1.27" (W) x 1.57" (H) x 1.58" (D)

(32.5 (W)

X

40 (H)

X

40.2 (D) mm)

Camera control unit: 4.33" (W) x 1.57" (H) x 6.14" (D)

(110 (W)

X

40 (H)x 156(D) mm)

Scene file (user memories)

A, B, C

White balance

ATW (Automatic tracing white balance),
AWB (Automatic white balance), MANU (Manual)

Gain

AUTO (Automatic gain control),

MANU (Manual), NORM (0 dB)

Output signal

VBS: 75П unbalanced, BNC connector, NTSC standard
Y/C: 75Q unbalanced, S terminal

RGB or Y/PR/PB: 75i2 unbalanced, D sub 9 pin connector

VBS or Y/C: 750 unbalanced, D sub 9 pin connector

External sync input

VBS/BB: 750 unbalanced. Sync negative BNC connector

SYNC 0.286V, Burst 0.286V

HDorVD: 2 ~ 5V(p-p) Negative

Sync signal output

SYNC: 2.5 ± IV(p-p), 750 unbalanced
HDorVD: 5V V(p-p), Negative,

Loatffrnpedance: More than 10 kO

1 pulse trigger

TRIGGER: L level: Less than 0.5V, H level: 4 ~ 5V, Positive

Index output:

INDEX: L level: Less than 0.5V, H level: 4 ~ 5V

Negative , Load impedance: More than 10 kO