Toshiba IK-TU40A - Manual (Page 17)

(b) Changing the automatic shutter detection
(ratio between peak and average value)
® Set the to PEAK/AVE by pushing [MENU UP], [MENU DOWN] buttons.
® Set the ratio between peak and average value by pushing [DATA UP], [DATA DOWN]
buttons.
(Peak : Average value) The peak value increases by pushing [DATA UP].
00:10 <----> 05:05 <----> 10:00
------ The peak value decreases by pushing [DATA DOWN].
(c) Changing the automatic shutter response speed
® Set the to SPEED by pushing [MENU UP], [MENU DOWN] buttons.
@ Set the response speed by pushing [DATA UP], [DATA DOWN] buttons.
------- ^The response speed beconnes quick by pushing [DATA UP].
01 <----> 05 <----^ 10
------- The response speed becomes slow by pushing [DATA DOWN].
(d) Changing the automatic shutter zone area
® Set the to AREA by pushing [MENU UP], [MENU DOWN] buttons.
@ Set the measurement light area by pushing [DATA UP], [DATA DOWN] buttons.
[DATA UP]
^PRESET a :^: preset b
X
preset C
X
preset D
X
user ^
[DATA DOWN]
" 1 1
1 1
1 1
1
1
1 Custom
1 1
1 1 1
1 selection
PRESET A PRESET B PRESET C PRESET D USER
(e) Confirming the contents of the measurement light area selected
by the automatic shutter
® Set the to AREA DISP by pushing [MENU UP], [MENU DOWN] buttons.
@ Area screen appears by pushing [DATA UP], [DATA DOWN] buttons.
When AREA is set to USER, the setting can be changed on the area menu. When
changing the area, refer to the item "7.2 (7) Setting USER area".
@ Push the [DISP] button to return to the menu.
(f) Changing the CCD storage mode
® Set the to FLD/FRM by pushing [MENU UP], [MENU DOWN] buttons.
(D Select either FLD (field) or FRM (frame) by pushing [DATA UP], [DATA DOWN]
buttons.
17