F 22, C4) process (process) – Toshiba IK-TU40A User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C4) PROCESS (Process)
Move up and
down by pushing
MENU UP, DOWN
Set by pushing
DATA UP,
DOWN.
A
-- 4 PROCESS
^GAMMA ON/OFF
GAMMA
BLACK GAMMA
2D LPF
DTL GAIN
DTL B.FRQ
M. PED
Gamma correction ON/OFF
Gamma correction level setting
( 1 0
1 0
)
Black level gamma (LOW,NORM,HIGH)
Two dimension low pass filter (ON/OFF)
Detail gain setting
Detail boost frequency setting
(LOW, NORM, HIGH)
Master pedestal setting
(4.1) Changing the gamma correction ON/OFF
© Set the to GAMMA ON/OFF by pushing [MENU UP], [MENU DOWN] buttons.
@ Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
When ON is selected, menu will show the GAMMA and BLACK GAMMA selec
tions.
When OFF is selected, GAMMA, BLACK GAMMA, and 2D LPF disappear. So the
setting for GAMMA, BLACK GAMMA, and 2D LPF cannot be made. (2D LPF setting
turns OFF.)
Gamma correction ON/OFF
Detail gain setting
Detail boost frequency setting
(LOW, NORM, HIGH)
Master pedestal setting
Menu when GAMMA OFF is selected.
(4.2)
Changing gamma correction level
® Set the to GAMMA by pushing [MENU UP], [MENU DOWN] buttons.
®
Set the gamma correction level by pushing [DATA UP], [DATA DOWN] buttons.
—^Correction amount becomes large.
_-]Q
<----> 00
<---->
10
— Correction amount becomes small.
(When OFF is selected in GAMMA ON/OFF selection line, the display GAMMA
turns off automatically. So the gamma correction level change cannot be changed.)
f 22^