N n □ □ □ □ □ □ □ n – Toshiba IK-TU40A User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(6.2) Changing OUTPUT 2 output
© Set the to OUTPUT 2 by pushing [MENU UP], [MENU DOWN] buttons.
®
Select either VBS or Y/C by pushing [DATA UP], [DATA DOWN] buttons.
(6.3) Changing Negative/Positive inversion switch
® Set the to NEGA/POSI by pushing [MENU UP], [MENU DOWN] buttons.
@ Select either NEGA (negative) or POSI (positive) by pushing [DATA UP], [DATA
DOWN] buttons.
(6.4) Changing detail signal output
® Set the to DTL OUT by pushing [MENU UP], [MENU DOWN] buttons.
® Select either ON (detail signal only is output) or OFF (video signal) by pushing
[DATA UP], [DATA DOWN] buttons.
(6.5) Changing shading
® Set the to SHADING by pushing [MENU UP], [MENU DOWN] buttons.
®
Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
When ON is selected, the automatic shading correction can be performed by [MENU
UP] button. When performing the automatic shading correction, refer to the item
"6.5 Shading Correction". (Page 12)
(6.6) Changing G SYNC
® Set the to G SYNC by pushing [MENU UP], [MENU DOWN] buttons.
®
Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
(When Y/P
r
/P
b
is selecd, G SYNC disappears.)
(7)
Setting USER area
• When USER is selected for the AREA of the automatic shutter or for AWB, the light
measurement zones can be changed.
• The USER area is composed of 64 zones with 8 (vertical) x 8 (horizontal) areas, and
each area can be set to ON/OFF.
® Set the output to area menu.
Set the output to the area menu by referring to the item "7.2 (1.1) (e) Confirming the
contents of the measurement light area selected by automatic shutter" and "7.2 (3.2)
(c) Confirming the contents of the zone area selected by AWB".
□ □ □ □ □ □ □
□ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □
□ □ □ □ □ □ □ □
□ n n □ □ □ □ □
□ □ n □ □ □ □ □
26