C5) sync (sync) – Toshiba IK-TU40A User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(4.7)
Changing master pedestal
® Set the to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
(D Set the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
-50
"M.PED rises by pushing [DATA UP].
> 00 <-------- >- 50
M. PED decreases by pushing [DATA DOWN].
(When DTL OUT ON is selected in OPTION menu, the display M. PED turns off
automatically. So the M. PED change cannot be performed.)
IVIenu when DTL OUT ON is selected in OPTION menu.
C5) SYNC (sync)
When an external sync signal is input, the display changes from INT (internal sync) to
EXT (external sync) automatically.
INT
EXT
(5.1) INT screen
--- 5 SYNC
—
MODE
INT ◄-----
Sync system display
(5.2)
Changing EXT setting
24
► Phase adjustment
H PHASE -99
99
SC 0/180
0,180
SC PHASE -99 ~ 99