Toshiba TEC MA-1060-100 Series - Manual (Page 80)

CONDITION; After Hourly Reset
OPERATION: Mode Lock: SET
HOURLY RANGE SETTING
I 7 l r @ / F O R i( o r [ x ] )
1
HOUR I MINUTE I
1
Enter the time
that ends each
hourly rangej
in the
24
-hour
system.
>|AT/TL|
Repeat until all
the time ranges
are entered.
NOTES:
1. A maximum of 24 hourly ranges
may be set.
2. To change the table of hourly
ranges once set, partially or
entirely, do the entire setting
operation over again.
3. To reset the hourly range table
once set, operate in "SET" mode:
I7l>l@/FQRU|0 !>!¥]» I AT/TLl
4. Do not set a range across 24:00,
such as "from
23:00
to 1:00".
If ever set, no data will be
processed into that hourly range.
5. Even if a time value more than
24:00
is set, it will not result
in an error but the data will
not be processed in that range.
ex.) To reset the hourly range table once set:
Mode Lock to SET, enter 7, depress I@/F0RI.
Enter 0, depress jj] j depress [AT/TLI
ex.) To set the following hourly range table
up to 8:00
from 8:00 to l6:00
from l6;00 to
23:00
Mode Lock to SET, enter 7, depress I@/F0R|
Enter 800, depress •
Enter 1600, depress [jj .
Enter
2300
, depress S]•
Depress iAT/TLI to end.
te : c store
PEACH DRiUt::
RHONEi 077"6437
T u a n K y o u
C:a 11 aqa i n
■10-01-05 40
F - 0 7
00:08
16 ! 00
23:00
0035
11
:06
76 -