Toshiba TEC MA-1060-100 Series - Manual (Page 13)

If the key is used immediately after a previous balance entered
through the IPB+1 key, the percent rate is added to the previous
balance. _But the I % - \ key cannot be used in this case. Neither may
the I %-v I or key be used immediately after a previous balance
entered through the |PB-j key.
iPLUi PLU (Price-Look-Up) KEY
This key is used to enter a PLU that is linked to a department. Each
PLU can be programmed to be preset PLU (to allow the preset price
entry only) or an open PLU (to allow a price entry through the numeric
keys each time),
TO ENTER THROUGH PRESET PLU:
PLU Code PLU
1~3 digits
The preset price
be read and entered,
to repeat the same
the 1PLUI only,
operation.
will automatically
PLU price, depress
after the above
TO ENTER THROUGH OPEN PLU;
PLU Godei ■
1~3 digits
PLU PRICE
The price indexed on the numeric keys
will be entered.
To repeat the same PLU price, depress
the I AMT I key only, after the above
operation.
As for quantity extension and split pricing involving PLUs, refer
to the "REGISTERING PROCEDURE FOR SALES".
Each PLU is programmed with a 3-digit PLU Code, a 2-digit linked
Department Code, and if used as a preset PLU, a maximum of 6-digit
preset price.
1IC/VDI item correct / VOID KEY
This is a dual-function key that has both I ITEM CORR I (item Correct)
and I VOID 1 (Designated Line Void) key functions. (These two keys
can separately be installed as optional keys inplace of the |IC/VDj
key.)
ITEM CORRECT FUNCTION:
If depressed (without a prior numeric entry) after an item-
correctable entry, it functions as Item Correct key, removing the
last item from the bill and printing a etched lined through that
item on the receipt and journal.
The item-correct function is effective even when a numeric entry
and a key depression are done between the department entry to
be corrected and the [
IC/vFI
key depression.
- 9 -