Toshiba TEC MA-1060-100 Series - Manual (Page 76)

PLU TABLE PROGRAMMING OR CHANGING
CONDITION: After a_PLU Reset to renew the PLU table, or any time outside
a sale to program additional PLUs or to change the PLU name
o n ly . ^ .
OPERATION: Mode Lock: SET
41 l@/F0Rl
(or \X] )
IPLU Code
( 1 - 9 9 ^
PLU ►([whole Package Quantity]|STj)—^
1~99, or 0 for resetting;
for split-price PLU only_______
for
another
PLU
for open PLU
1 Unit Price I —
rmax. 6 dig.)
for preset PLU
for the next
isequencial PLU
• ( r W M l)
for tax status
change in single­
tax area
(|Tx2/M|)-
for tax 2
status
change
> 1 D e p T r i-
linked
Depart­
ment
in dual-tax area
STEP (A): Status Change
_ _ _ t h e ^
Repeat for the next character, regular-sized count.
regular-sized
character
___ I¥7 tor 1__
one double-sized
character
■ i@7 f ORI I @/F0R I-
Entire PLU name
with all double-sized
characters
Character Codel-»]^!
(2 or 3 digits;!
see the table
on page 96 ,)
[sT]—»|T t 7 tl 1
for spacing ins
of a character
to end the PLU Name
( If any space is left
-— j unprogrammed in the
tail, it will auto­
matically be programmed
as space.)
STEP (B): Name Change
Repeat for other PLUs
(max. 300 PLUs)
NOTES: 1. The " | PLU Code 1 rPLUl ” entry may be skipped if the PLU Code is
sequencial from the previous PLU's code. If this PLU code entry
is skipped at the very first PLU, the PLU code will automatically
be programmed as PLU No.l.
2. As for the tax status change refer to
the description in NOTE 6 (page 70 ) which is attached to the
"DEPARTMENT NAME AND STATUS PROGRAMMING OR CHANGING" operation.
Each PLU's tax status is programmed independently from
that of the linked department. However, the positive/negative
status of a PLU is ruled by that of its linked department.
- 7 2