Toshiba TEC MA-1060-100 Series - Manual (Page 22)

If the "TOTAL VALIDATION" option is selected, depressing the
I
VALIDATE
I
key after a 1TXBL TL| key operation prints the sale total
on the validation slip, and therefore, only a finalizing operation
then is allowed.
In charge posting, depressing the iTXBL TL! key displays the amount
including taxes without the previous balance.
OTHER OPTIONAL KEYS
The following keys are not shown in the KEYBOARD LAYOUT on page 5 nor
described on the previous pages. However, any of them may be installed if the
customer requires. But please note that some of the present keys may have to
be dispensed with or additional memories may have to be installed to gain
additional functions. Please contact your TEC representative if any of the
following keys is necessary.
Additional Department Keys
A maximum of 30 department keys includinng the present department keys
may be installed.
SHIFTI DEPARTMENT SHIFT KEY
This key functions similarly to the "Shift Key" on a regular
typewriter keyboard. Two departments can be programmed on one
department key, and shifting from one to the other is possible_. For
example, Department 1 Key can be used as Department 16 if the
key is depressed prior to DEPT 1 key.
SHIFT
In this case, the number of
all the department keys on the keyboard must be 15 or less. Thus the
keyboard can spare space to other function keys despite the number of
departments.
The SHIFT key is effective to shift a department for only one entry;
therefore, the shifted department can only be repeated by the
key but not by the department key.
RPT
|RPT| REPEAT KEY
This key is used to repeat a department or PLU entry. This key
enables repeat entries not only for normal department or PLU items but
also items modified with PR OPEN ,
I
SHIFT 1, etc.
IOPENI LC-and-PRESET OPEN KEY
This is a dual-function key that has both LC OPEN key and PR OPEN
key functions.
- 18 -