Toshiba 32HLX95 - Manual (Page 86)

Chapter 10: DVD Playback
Locating a chapter or track
1. Press SKIP or ►M repeatedly to select the chapter or
track you want.
Playback starts from beginning of the selected chapter or track.
Note:
A “Prohibition" symbol % may appear at tbe upper left of the screen. This
symbol means either the feature you tried is not available on the disc, or the
TV cannot access the feature at this time. This does not indicate a problem
with the TV.
A-B Repeat playback
A-B repeat playback allows you to repeat material between two
selected points.
1. Press A-B REPEAT at the beginning of the segment (point
A) you want to play repeatedly during playback.
The start point is selected.
2. Press A-B REPEAT again at the end of the segment (point
B). The TV automatically returns to the point A and starts
the repeat playback of the selected segment (A-B).
To resume normal playback:
1. Press A-B REPEAT again.
“A TO B CANCELLED” appears on the screen.
Note:
• If you press STOPM, the A-B Repeat function ends and playback stops.
• Some discs may not permit the A-B repeat operation.
• There may be a slight difference between point A and the location where
playback actually resumes depending on the disc.
• You can specify a segment only within the current title or track.
• In A-B Repeat mode, subtitles near the A or B locations may not be
displayed.
• You cannot set the A-B Repeat for the scenes that Include multiple angles.
A-B Repeat playback does not work when Repeat playback is activated.
You may not be able to set A-B Repeat, during certain scenes of the
DVD.
A-B Repeat does not work with an interactive DVD, MP3/JPEG CD.
A-B Repeat is prohibited when PBC is on.
Various functions (such as FF, REW, slow motion, etc.) may not be
available during the A-B Repeat playback.
Changing angles
When playing back a disc recorded with multi-angle facility, you
can change the angle that you are viewing the scene from.
1. Press ANGLE Q] during playback.
The current angle will appear.
2. Press ANGLE Qi repeatedly until the desired angle is
selected.
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
Title selection
Two or more titles are recorded on some discs. If the title menu
is recorded on the disc, you can select the desired title.
1. Press TOP MENU during playback.
The Title menu appears on the screen.
2. Press to select the desired title.
3. Press ENTER or PLAY ►.
The playback of the selected title will start.
Note:
• Depending on the DVD, you may not be able to select the
title.
• Depending on the DVD, a “title menu” may simply be called
a “menu” or “title” in the instructions supplied with the disc.
• Depending on the DVD, the title menu may be displayed
automatically when die disc is loaded.
• Depending on the DVD, a chapter menu may be displayed
after you select a title.
86
Copyright ©2005 TOSHIBA CORPORATION. All rights reserved.