Viewing the system status, To check the system status, Restore factory defaults – Toshiba 32HLX95 User Manual

Page 45: To cancel the reset

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 6: Setting up your TV

Viewing the system status

To check the system status:

1. Press MENU and open the Setup menu.

2. Highlight Installation and press ENTER. (A new set of

Installation menu icons will appear on-screen, as shown
below right).

I Sleep Timer

I On/Oif Timer

ii; PC Seilirigs

I HDMI Audio

Gray Level

(#} Navigate • Select gliiTl

Open the System Status menu, highlight System
Information, and then press ENTER.

Use^^ to scroll through the menu bar to check the
Product Information and Software Version.

System Information

Brand: Toshiba

Model: 32HLX95

0.8.2

Jun 13 2005 - 13:54:14

FW:1.41

Sub:41

To close the screen and return to the Installation menu:

Highlight Done and press ENTER.

To return to normal viewing:

Press EXIT.

Restore Factory Defaults

To restore all settings and channels to their factory default

values:

1. Follow steps 1-3 above.

2. Use^^ to scroll through the menu bar to select Factory

Defaults.

System Information

I This window provides the ability to reset the TV

I settings.

I Type in your PIN now (or "0000" if no PIN has
I been set) to restore settings to their factory
I default values.

3. Enter your PIN code (or 0000 if no PIN code has been set).

4. Highlight Yes and press ENTER. The TV will turn off

automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the restore process.

To cancel the reset:

Highlight No and press ENTER.

This manual is related to the following products: