Tv back panel connections, Tv lower back panel – Toshiba 32HLX95 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2: Connecting your TV
TV back panel connections
TV upper back panel
©■
S-VtDEO
w'
VIDEO
L.MONO
L
r«
#1
AUDIO
AUDIO
m
VIDE0.1ViDEO*2
Before connecting the external device to the TV, remove the
applicable panel cover by squeezing the tabs in the direction of
the arrow (■►) and pulling the cover.
BArvTl.CABi.El
’&ANT
2I
............. *
LI ^ <-------------------------------------------------------------------------
‘Ss,
,|™o| I p, I
I
EJECT
I
—— CableCARD
1
® ®
® VIDEO-1 IN and VIDEO-2 IN
—Two sets of standard
(composite) video and standard audio inputs plus optional
S-video input for connecting devices with composite video or
S-video output.
Note:
Standard (composite] video and S-video cabies carry oniy
video information; separate audio cabies are required for a
complete connection.
@ ColorStream® HD 1 and ColorStream® HD 2 —
ColorStream® high-definition component video and standard
stereo audio inputs for connecting devices with component video
output, such as a Toshiba DVD player with ColorStream®. See
pages 18 and 19.
Note:
Component video cables carry only video information;
separate audio cables are required for a complete connection.
® HDMI AUDIO IN
— For use when connecting a DVI device
with analog audio output to the HDMI output, See page 21.
Also see item ® below.
® A/V OUT
— Standard composite video and analog audio
outputs for connecting a VCR for editing and dubbing. See page
20 for details.
® Variable Audio OUT
— Standard analog audio outputs for
connecting an analog amplifier with external speakers. See page 22.
® ANT-1 (CABLE) IN
and ANT-2 IN —Two inputs that
support analog (NTSC) and digital (ATSC) off-air antenna
signals and analog and digital (QAM) Cable TV signals.
®
TV lower back panel
Note:
If you have an antenna only connect it to ANT-1 If you have both
cable TV and an antenna, connect the cable TV to ANT-1 and the antenna
to ANT-2.
® PC IN
— For use when connecting a personal computer (PC).
See page 24.
(D
HDMI™ IN
—High -Definition Multimedia Interface input
receives digital audio and uncompressed digital video from an
HDMI device or uncompressed digital video from a DVI device.
See page 21.
® G-LINIC“
— For use with one of the enclosed IR blaster/ G-
LINK™ cables to enable the TV Guide On Screen™ recording
features. See page 23.
®
DIGITAL AUDIO OUT
— Optical audio output in Dolby
Digital/Surround or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio input.
See page 22.
@
CableCARD™ slot
— For use with a digital security card and
digital cable TV service (provided by your local cable operator) to
view encrypted digital programming. See pages 15 and 44.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
CableCARD™ is a trademark of Cable Television Laboratories, Inc.
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
13