Toshiba 32HLX95 - Manual (Page 78)

Chapter 8: Using the TV's features
Using the PC setting feature
You can adjust the horizontal position/size, vertical position/size,
clock phase, and sampling clock. This feature will be grayed out
on the menu unless there is a PC connected to the TV (See
“Connecting a personal computer(PC)” on page 24.)
To set the PC setting:
1. Confirm a PC is connected (see “Connecting a personal
computer (PC)” on page 24).
2. Repeatedly press INPUT to select PC input mode. (See
Selecting the video input source to view ” on page 60.)
3. Press MENU and open the Setup menu.
4. Highlight PC Settings and press ENTER.
Installation
iii Sleep Timer
On/Off Timer
HDMI Audio Auto
Gray Level 2
(¥) Navigate Select SB Back IWMExit
5. Press AW to highlight the item you want to adjust.
6. Press AT to make the appropriate adjustments.
PC Settings
Horizontal Position
Horizontal Width
Vertical Position
Vertical Height
Clock Phase
Sampling Clock
Reset
• Horizontal Position/Vertical Position:
Adjusts picture left/right and up/down.
The adjustment range is within ±5 from center.
(The adjustable range may vary depending on the input mode.)
• Horizontal Width/Vertical Height:
Adjusts picture width of Horizontal and picture height of
Vertical.
The adjustment range is within ±5 from center.
• Clock Phase:
This function is to reduce noise and sharpen the picture.
The adjustment range is within ±15 from center.
• Sampling Clock:
This function is to minimize periodic vertical stripes on the
screen.
The adjustment range is within ±15 from center.
78 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.