Selecting the cinema mode (480i signals only, To set the cinema mode to film, To set the cinema mode to video – Toshiba 32HLX95 User Manual

Page 68: Using the freeze feature, Selecting the cinema mode (480i signals only)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Chapter 8: Using the TV’s features

Selecting the cinema mode

(480i signals only]

When you view a DVD (480i signal; 3:2 pulldown processed)

from a DVD player connected to the VIDEO 1, VIDEO 2,
ColorStream EID I/HD 2 (component video), or HDMI inputs
on the TV, smoother motion can be obtained by setting the
Cinema Mode to Film.

To set the Cinema Mode to Film:

1. Press MENU and open the Video menu.

2. Highlight Theater Settings and press ENTER.

..J&Ji

is; Picture Settings

!i Advanced Picture Settings »

(^1 Mavigate Select B!l!ii!l Back IHil Exit

3. In the Cinema Mode field, select Film.

Theater Settings

Picture Size

Picture Scroll

Cinema Mode

Auto Aspect Ratio

Natural

-1

4. To save the new settings, highlight Done and press

ENTER. To revert back to the factory defaults, highlight
Reset and press ENTER.

To set the Cinema Mode to Video:

Select Video in step 3 above.

Using the FREEZE feature

1. When viewing the TV, press FREEZE to make the picture a

still picture.

2. To return to the moving picture, either press FREEZE

again, press EXIT or press any other button.

Note:

If the TV is left in FREEZE mode, after 15 minutes it will

automatically release the EREEZE mode and return to the

moving picture.

Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright Laws of

the United States and other countries, and may subject you to

civil and criminal liability.

■FREEZE

This manual is related to the following products:

37HLX95