You will need – Toshiba 32HLX95 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 2: Connecting your TV
Connecting a VCR and satellite receiver with CoiorStream® (component video)
You will need:
► one signal splitter
► four coaxial cables
► one set of component video cables (if your
satellite receiver does not have component
video, connect the standard A/V cables only)
► one pair of standard audio cables
► three sets of standard A/V cables
• For better picture performance, if your VCR have S-video, connect
S-video cabtes [plus the audio cables] instead of the standard
video cables. Do not connect both types of video cable to VIDEO 1
at the same time or the picture performance will be unacceptable.
• If you have a mono VCR, connect L/MONO on the TV [VIDEO 1]
to your VCRs AUDIO OUT terminal using the white audio cable
only.
D To view satellite programs using the component video
connections:
Select the CoiorStream HD 1 video input source on the
TV*
D To view satellite programs using the standard video
connections or to record satellite programs:
Turn on all three devices. Set the VCR to the appropriate
line input (refer to your VCR owners manual for details).
Select the VIDEO 2 video input source on the TV*
Q To view the VCR or view and record antenna channels:
Turn ON the VCR. Select the ANT-1 video input source
on the TV* Tune the TV to channel 3 or 4 (whichever
channel is vacant in your area).
From antenna
Signal splitter
nr IT
ni IT
wU 1
* To select the video input source, press INPUT on the remote control
[see page 60). To program the TV remote control to operate other
devices, see Chapter 3.
Satellite receiver
D To use the TV Guide On Screen™ recording features:
1. Connect the G-LINK™ cable according to the
instructions on page 23.
2. Make sure the VCR is connected to the A/V OUT
terminals on the TV (see illustration).
3. Set the VCR to the appropriate line input (refer to your VCR
owners manual for details), and then mrn OFF the VCR.
4. See Chapter 5 for details on setting up the TV Guide
On Screen™ system.
5. See Chapter 7 for details on using the TV Guide
On Screen™ system.
Note:
The TV Guide On
Screer?™ system does not receive program
listings from or for any satellite service.
Note:
The VIDEO/AUDIO OUT terminals output signals from the ANT 1,
ANT 2, VIDEO 1, and VIDEO 2 terminals when the appropriate input mode
is selected. The playing disc’s contents by the DVD section are not output
The unauthorized recording, use, distribution, or revision of television
programs, videotapes, DVDs, and other materials is prohibited under the
Copyright Laws of the United States and other countries, and may subject
you to civil and criminal liability.
18
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.