Removing dimms – Toshiba V1100 User Manual

Page 51

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

4. Insert the bottom edge of the DIMM into the DIMM socket and make

sure it is seated correctly.

5. Gently push the top edge of the DIMM until the retaining clips at

each end of the socket snap into place.

Removing DIMMs

1. Gently spread the retaining clip at each end of the socket.

Removing a DIMM module

2. Holding the DIMM only by the edges, lift it away from the socket,

and store it in an antistatic package.

User's Manual

Hardware for the V1100 3-11