Toshiba V1100 - Manual (Page 42)

Before opening the case
Before you open the computer case, follow these steps:
1. Follow your operating system's shutdown procedure before you turn
off the computer.
2. On the front panel, press the power button to turn off the computer.
3. Unplug all computer and peripheral power cables from the wall
outlets or from your surge protector.
Disconnect all cables from the computer.
0
4.
Failure to disconnect power, telecommunications links, networks, or
modems before you open the system or start any procedures can result
in personal injury or equipment damage. Some circuitry on the
motherboard may continue to operate even though the power is off.
Removing the case
For most servicing, only one side panel needs to be removed. This should
be the only part you need to remove to:
□ Add memory
□ Install an expansion card
□ Install a 5.25-inch device in one of the 5.25-inch device bays
To remove the left panel:
1. Remove the screw from the rear of the case that attach the left panel.
2. Pull the case toward you about an inch, then lift the case up and off
the machine.
Pulling ihe panel back
3-2 Hardware for the V1100 User's Manual