RCA RC5227P - Manual (Page 59)

Playin
0
MP3 Files
The Repeat Feature
The default mode for the Repeat feature is Off. There are two Repeat options for MP3 discs:
• Disc - repeats the disc or playlist (if you’ve created one) that is playing
• Title - repeats the title (song) that is playing
To Use Repeat:
1. while a disc is playing, press INFO on the remote or the front of the player to bring up the
Info Display. .
2. Highlight the Repeat icon. The text in the text box below the icons will read Repeat Mode: Off.
3. Press the up/down arrow buttons to scroll through the Repeat options until the Repeat option
you want is displayed in the text box.
4. Press OK. The selected repeat option will loop continually until you turn Repeat off. Repeat is
turned off by completing steps 1 through 3 above, and selecting the Off option.
Using IntroScan™
The IntroScan system plays the first ten seconds of each title (song) on the disc (similar to the scan
feature that’s on many car radios). To use the IntroScan system;
1. Press INFO on the remote or the front of the player (the Info Display appears).
2. Highlight the IntroScan icon. Press OK. The first ten seconds of each title will play.
• After the IntroScan system goes through all of the titles, it stops.
• If you want to stop the IntroScan system while it’s in progress, press PLAY on the remote.
The current title starts playing in its entirety.
• You can also access the IntroScan system from the Play Mode menu in the DVD Player’s
main menu.
The MP3 Screen Saver
The MP3 screen saver appears when an MP3 disc is in the player. Once you begin playback, the
screen saver disappears and the MP3 Info Display and screen appear. After one minute of no user
input, the Info Display and screen will disappear. Press any key to bring up the display again,
Press CLEAR or INFO to remove the Info Display and bring up the MP3 screen saver.
Chapter 4 57