1 airplane use, 2 storing latch – Graco SnugRide 1778253 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8.1 Airplane Use
When installing in an airplane using the
base, install the same way as in an
automobile with a lap only belt. If using the
infant restraint only, install it following the
same instructions as an automobile. Notify
the airline ahead of time that you intend to bring the seat on board.
Use only in forward-facing aircraft seat. Follow the flight
attendants instructions about infant restraint placement.
Do not use this infant restraint if the airplane seat belt does
not hold the infant restraint securely.
8.2 Storing LATCH
1.
For ease of storing, extend
LATCH to its maximum length.
2.
Locate the storage bars on
bottom of infant restraint base ©.
3.
Fasten connector (without
adjustment belt) onto storage bar.
4.
Repeat step 3 for connector
with adjustment belt. After
fastening onto storage bar,
pull on adjustment belt to make
sure LATCH is securely fastened.
5.
LATCH storage should look
like this when complete ©.
42