Graco SnugRide 1778253 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Tighten the vehicle seat belt. To create
a secure installation, push down
hard with your free hand on the
infant restraint © and pull and tighten
the vehicle belt.
5. Check carseat is level: Red level
line on the warning label
MUST be level with the ground ©.
6. Test infant restraint for secure installation
as described in infant restraint “Final
Safety Check” page 41.
7.2 Installing the Infant Restraint
and Base Using Vehicle Belt
1. Make sure vehicle is on level ground
O so that the level indicator on base
can be used to properly recline the
infant restraint.
Place the base in a rear-facing position ©
on a vehicle seat.
35